| Minimum and maximum size: |
Louver size |
Panel width
(one single panel) |
Panel width
(coupled panels) |
Panel height
(normal) |
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
| 47 mm (Traditional) |
152 mm |
762 mm |
152 mm |
660 mm |
254 mm |
3378 mm |
| 63 mm (Plant age) |
152 mm |
914 mm |
152 mm |
660 mm |
254 mm |
3378 mm |
| 89 mm (California) |
152 mm |
914 mm |
152 mm |
660 mm |
254 mm |
3378 mm |
|
Please note: When using a panel which is higher than 1500mm horizontal profiles are standard . A second horizontal profile is needed once the panel is higher than 2300 mm.
Production tolerances:
Width: There can be a 1 mm difference in the ordered width. (Plus or minus)
Height : The panel height can have a 1.6 mm difference in the ordered height (Plus or minus)
The height of the diagonal connection can differ by half a louver width.
For the 47 mm louver, a difference of +/- 19mm
For the 63 mm louver, a difference of +/- 25mm
For the 89 mm louver , a difference of +/- 38 mm
|
| Difference between panel and window mount (where hinges are connected to) |
1.5 mm |
| Difference between panel and window mount (without hinges) |
5 mm |
| Difference between panel and frame, at the top and botton |
2.5 mm |
| Difference between the bottom of panel and floor/ window |
5 mm |
| Folding rail system: difference between panel and side drame |
6.5 mm |
| Folding rail system: difference from panel to the end of the frame (without side frames) |
6.5 mm |
| Sliding rail system: Difference between panel and side frames |
0 mm |
| Sliding rail system: Difference between panel and the end the cove on both sides (without side frames) |
3 mm |
|
